How to Use the Porous Clay Pots and Pipes System

Aus AutarkWiki
Version vom 8. Juni 2021, 14:49 Uhr von Andre Pohle (Diskussion | Beiträge) (Schützte „How to Use the Porous Clay Pots and Pipes System“ ([Bearbeiten=Nur automatisch bestätigten Benutzern erlauben] (unbeschränkt) [Verschieben=Nur automatisch bestätigten Benutzern erlauben] (unbeschränkt)))
Zur Navigation springen Zur Suche springen

Übersicht

Übersicht übernommener Howtopedia Artikel, Zum Übersetzten Artikel , Zum originale Artikel

Porous Clay Pots and Pipes for Small-scale Irrigation

Porousclaypots01.png


Porous clay pots and pipes are a means of water application that conserve water by applying water directly to the roots of plants, thereby limiting evaporation losses

Short Description

  • Problem:
  • Idea:Porous clay pots and pipes conserve water and enable crops to grow in areas where they otherwise could not grow. With this technology, it becomes possible to save water and irrigate small vegetable gardens in rural areas.
  • Difficulty:The initial labour required to manufacture the pots/pipes and install this technology is very high. The use of clay pots can be more labour intensive than traditional methods of watering crops, and may have difficulty in coping with providing adequate water for crops with high water requirements. Also, the porosity of pots decreases with time, and they have to be replaced at intervals. Pot lifespans are greatly reduced by the use of turbid water with a high silt and clay content. The silt accumulates in the pores, effectively sealing the pipes/pots.
  • Price Range: Since this technology uses clay pots and clay pipes that are locally manufactured, the costs are normally low. The major cost is the cost of labour, which is estimated at approximately $40/ha in Zimbabwe.
  • Material Needeed: locally available clay / unglazed clay pots
  • Geographic Area:This technology is most suitable for dry areas with less than 500 mm rainfall/year.
  • Competencies:Communal farmers, especially women, can manufacture the pots/pipes without having to develop special skills.
  • How Many people?
  • How Long does it take?

Technical Description

Pitcher Irrigation or Clay pots irrigation is an inexpensive small-scale irrigation method practiced in the semi-arid state of Karnal, India. The system consists of burying unglazed clay pots in the soil up to their neck. When the pot is filled with water, the natural pores in the pot's walls allow water to spread laterally in the soil, creating the moist conditions necessary for plant growth. Pitchers are filled as needed, maintaining a continuous supply of water directly to the plant root zone.
Pitcher irrigation is used for small-scale irrigation where:

  • Water is either scarce or expensive.
  • Fields are difficult to level such as under uneven terrain.
  • Water is saline and cannot be normally used in surface methods of irrigation.
  • In remote areas where vegetables are expensive and hard to come by.

One of the advantages of using pitchers for irrigation is the result of their water saving capacity.

To compare pitcher irrigation to flood or sprinkler irrigation one must correct for the fact that the scales are radically different. Pitcher irrigation is used on small-scale, while flood and sprinkler systems are for more extensive irrigation. Taking this into account, pitcher irrigation is still more efficient. Pitcher irrigation uses water more efficiently than other systems since it delivers water directly to plant root zones, instead of to broader areas of the field. With pitcher irrigation, deep percolation losses are negligible since water is released from smaller areas, and the rate of water loss can be controlled site to site by the amount of water put in each pitcher. Water requirements in a pitcher irrigated field can be even less than those of a drip irrigated system (of the same scale) due to the very low hydraulic conductivity of the pitchers, as well as reduced evaporation losses.

Clay pipes

Clay pipes irrigation is based on the same principle. Both clay pipes and clay pots can be homemade; most are installed by individual householders. The pipes are joined to form tubes of 250 mm in length with an inside diameter of 75 mm. The pipes are placed along the entire length of the beds by laying them end-to-end in a levelled trench. At one end, a right angle fitting is attached and an upright section of pipe installed. The trench is then backfilled with soil to a depth of 100 to 200 mm, depending upon the soil type. Water is poured into the porous pipe through the upright pipe. Each plant bed is about 3 to 6 m in length. The water seeps into the root zones through the joints between the individual pipes, or through the pipe walls if unglazed clay pipes are used. Alternatively, porous pots (made of unglazed clay) are buried in the soil up to their necks next to the plants or between plant rows at intervals of 300 mm. Water seeps from each pot through the pores and forms a wetted zone. Varying the frequency of filling, the size of the pots and the spacing between pots affects the watering process. Selection of the most suitable size of pot and its placement is governed by the type of crop.


Extent of Use

Adoption is fairly limited, possibly due to the fact that the initial stages are very labour-intensive. Trials in the dry areas of Chiredzi, Zimbabwe, have shown that communities are interested in this technology.

Once the systems are installed, there is very little maintenance required. Operation is quite simple.

Farmers, researchers and extension workers must work together to implement this technology. Communities can construct and operate the system. However, government officials and/or NGOs may have to work with pipe/pot manufacturers to ensure availability of supplies of suitable pots and pipes. Extension workers can assist farmers in pipe/pot placement for best effect and at depths/densities best suited for various types of crop.

Advantages

Material for clay pipes and pots, and local skills for pot-making, are readily available at negligible cost. This method provides a uniformly-wetted area, and, because water is applied at depth, often helps to reduce any weed problems - weeds generally have shallow root systems that are not well-served by this technology. Also, pots can be placed next to individual plants. Once the technology is installed the system can be used for several seasons. Effectiveness of the Technology It was found, during the replicated trials, that water savings varied from 11 to 28% of the water used with traditional irrigation.

Difficulty

The initial labour required to manufacture the pots/pipes and install this technology is very high. The use of clay pots can be more labour intensive than traditional methods of watering crops, and may have difficulty in coping with providing adequate water for crops with high water requirements. Also, the porosity of pots decreases with time, and they have to be replaced at intervals. Pot lifespans are greatly reduced by the use of turbid water with a high silt and clay content. The silt accumulates in the pores, effectively sealing the pipes/pots. Note: the turbidity and the salinity of the water can be reduced by the use of a sand filter. see How to Lower Water Turbidity with a Roughing Filter

  • Price Range: Since this technology uses clay pots and clay pipes that are locally manufactured, the costs are normally low. The major cost is the cost of labour, which is estimated at

The crops you can grow...

There are a variety of crops that can benefit from pitcher irrigation practices. There currently is not a lot of information available on the internet on the differences in the techniques for each crop. There a few basic differences in technique.
As we have shown on our technical page, upright vegetable crops require a 7-10 liter clay pot and 3-6 plants can be grown surrounding each pot. For creeping crops, or vines (i.e. melons, gourds, tomatoes...), the pot size can be 1-2 liters smaller and can be spaced further apart, requiring fewer pots per hectare.
Researchers at CSSRI found that the most profitable crops for pitcher irrigation in that area were (in order):
tomato> bottle-gourd> bitter-gourd> watermelon> cauliflower.
The muskmelon was unprofitable, thus they do not recommend its cultivation with pitcher irrigation.
Trees will require larger, deeper pots. Depending on tree spacing and species, one tree may require up to 3-4 pots.

Clay pots / Pitcher and Salinity

Research with pitcher irrigation at the Central Soil Salinity Research Institute (CSSRI) in Karnal India indicates that the amount of water which seeps out of the pots--and thus the number of plants which can be sustained by each pot--depends on the soil type, the porosity of the pot wall as well as the shape of the pot used. Pitchers are generally placed at distances so that wet areas do not overlap. Soil moisture and salt distribution in the plant rootzone are much more favorable with pitcher irrigation than with any surface method of irrigation. Under pitcher irrigation salt accumulates at the soil surface, leaving the salt content of water in the rootzone more favorable than the salinity of water used in the pitcher. Thus even saline water can be used for irrigation in the pitcher irrigation system. Watermelon and muskmelon both tolerated water salinity levels of up to 12 dSm-1. A tomato crop yielded almost 29 t/ha at 12 dSm-1 with 5000 pots/ha. Note that water of good quality for irrigation has a conductivity below 2 dSm-1, while sea water has a conductivity of about 46 dSm-1. Scientists at the Central Soil Salinity Research Institute have found that seven to ten litre pots are sufficient to grow most vegetable crops. The number of pitchers needed per hectare varies with the crop. At least four plants of most vegetable crops could be grown around one pot. A creeping crop such as bitter gourd required 2,000-2500 pitchers per hectare. Upright crops, or crops producing a canopy around the pot required more pots, up to 4,000-5000 pots per hectare.

The profitability of pitcher irrigation

The profitability of pitcher irrigation must consider the labor of acquiring, burying, and filling the pots, in addition to the labor involved in managing the crop.
The prospects of pitcher irrigation are reasonably high, especially in areas where water scarcity and salinity limit cultivation. The only difficulty with this method is the high labor demand which it places on the farmer. Pitcher irrigation may be an inappropriate solution where the labor needed to set up and run the system would fall on already overworked laborers.

Related articles

  1. How to Use the Porous Clay Pots and Pipes System
  2. How to Start Culture in Zai Holes
  3. Micro Irrigation
  4. How to Harvest Water
  5. How to Build an Underground Brick Dome Water Tank
  6. How to Build a Rainwater Tank: Sri Lankan Pumpkin Tank
  7. How to Recycle Organic Waste
  8. How to Harvest Rainwater
  9. How to Stock Water in Cement Water Jars
  10. Biomass and Liquid Biofuel (Technical Brief)
  11. How to Harvest Run Off Rainwater
  12. How to Fight Soil Erosion by planting Vetiver Grass
  13. How to Build the ARTI Compact Biogas Digestor
  14. How to Fight Soil Erosion
  15. How to Stop Gullies on Eroded Slopes
  16. How to Get a Hipporoller
  17. How to Make a Hand Pump

Links

http://www.unep.or.jp/ietc/publications/techpublications/TechPub-8a/clay.asp

Vegetables:

This site has detailed methods for steps involved in setting up a family vegetable garden.

Discusses gardening applications in Africa. Also refers to other water-saving irrigation techniques for trees and creeping crops.

A newsletter from the Southern African Center for Cooperation in Agricultural and Natural Resources Research and Training on pitcher irrigation implementation in Zambia. Includes methods and results of techniques and practice.
creeping plants and vines

Gives background on irrigation used in semi-arid region of India. Discusses benefits of different types of creeping crops.

stalk crops and trees

Discussion of experiment on deep pipe and clay pot irrigation. Pitcher irrigation is a technique used in arid to semi-arid regions around the world. In addition to being less labor-intensive and more cost-effective, pitcher irrigation can also extend the growing season in many of these areas by efficiently providing water to crops throughout the dry season. Click on your area on the map below to find links to the articles specific to different regions Africa

  • CLAY POT SUB-SURFACE IRRIGATION AS WATER-SAVING TECHNOLOGY FOR SMALL-FARMER IRRIGATION

http://upetd.up.ac.za/thesis/available/etd-09062001-093813/unrestricted/08chapter7.pdf Thesis chapter discussing small-farmer irrigation in sub-tropical Africa. Discusses all aspects including how to design pots from raw, local materials to field application. This is a large PDF file and may take some time to download.

Table of Contents page listing alternative irrigation techniques including pot and porous capsule irrigation.

South Asia/Middle East

Gives background on irrigation used in semi-arid region of India. Discusses benefits of different types of creeping crops.

Implementation of pitcher irrigation in northern Syria.

Discusses pitcher irrigation implementation in India and gives general definitions and descriptions of irrigation techniques. We suggest doing a "Ctrl - F" search to find this particular dialouge on the site.

Bibliography

For more information and a copy of Pitcher Irrigation by R.C. Mondal, S.K. Gupta and S.K. Dubey, edited by H.K. Barthwal, Central Soil Salinity Research Institute, Karnal INDIA, Rakesh Press, 1987
See Volume 1 # 1 of the International Ag-Sieve for a brief description of pitcher irrigation in Uruguay.

Contact

Lowveld Research Station, Post Office Box 97, Chiredzi, Zimbabwe. Sourcebook of Alternative Technologies for Freshwater Augumentation in Africa

R.C. Mondal, Director Central Soil Salinity Research Institute Karnal-132001 INDIA

Related Articles

- How to Build Human-Powered Water-Lifters
- How to Build an Underground Brick Dome Water Tank
- How to Make a Hand Pump
- How to Make a Solar Pump
- How to Make a Hydraulic Ram Pump
- How to Build a Windpump (Principles)
- How to Use Diesel Engines
- How to Use Photovoltaic Energy
- How to Use Sun Power
- How to Use the Porous Clay Pots and Pipes System
- Micro Irrigation

Deeplink:

http://en.howtopedia.org/wiki/How_to_Use_the_Porous_Clay_Pots_and_Pipes_System

Videobeitrag

Emperor Caligulas Leseliste

Quelle: https://www.youtube.com/watch?v=TS02Gt9l5jU

Abgerufen von „https://autarkwiki.frei3.de/index.php?title=How_to_Use_the_Porous_Clay_Pots_and_Pipes_System&oldid=9518“